Installation - Sharp R-208 Manual De Instrucciones Y Recetario

Ocultar thumbs Ver también para R-208:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
8.SEEG R208 ENGLISH-1 05.2.25 5:35 PM Page 3 (1,1)
Use only the turntable and the roller stay designed
for this oven. Do not operate the oven without the
turntable.
To prevent the turntable from breaking:
(a) Before cleaning the turntable with water, leave
the turntable to cool.
(b) Do not put hot foods or hot utensils on a cold
turntable.
(c) Do not put cold foods or cold utensils on a hot
turntable.
Do not place anything on the outer cabinet during
operation.
1. Remove all packing materials from the inside of
the oven cavity. Discard the loose polythene sheet
from between the door and cavity. Remove the
feature sticker, if attached, from the outside of
the door.
Do not remove the protective film attached to the
inside of the door.
REMOVE
IMPORTANT SAFETY INSTRUCTIONS
NOTE:
If you are unsure how to connect your oven, please
consult an authorised, qualified electrician.
Neither the manufacturer nor the dealer can accept
any liability for damage to the oven or personal
injury resulting from failure to observe the correct
electrical connection procedure.
Water vapour or drops may occasionally form on
the oven walls or around the door seals and
sealing surfaces. This is a normal occurrence and is
not an indication of microwave leakage or a
malfunction.
2. Check the oven carefully for any signs of damage.
3. Place the oven on a flat, level surface strong
4. Ensure there is a minimum free space above the
5. Securely connect the plug of the oven to a standard
6. Make sure that the TIMER is set to the "0" (off)
DO NOT REMOVE
106

INSTALLATION

enough to support the oven's weight plus the
heaviest item likely to be cooked.
oven of 15cm:
15cm
earthed (grounded) household electrical outlet.
position.
Tabla de contenido
loading

Tabla de contenido