Idiomas disponibles
Idiomas disponibles
5
Operation
5.1
Start charging
To start a typical charging session:
1.
If the charge station is locked (
the charge station (see Status indicator).
2.
Open vehicle charge port cover.
3.
Remove the coupler from the remote dock.
4.
Plug the coupler into the vehicle charge port until it
clicks. The charge station should indicate that the ve-
hicle is establishing a connection to the charge station
(
).
5.
As soon as the vehicle and charge station are con-
nected, the charge station indicator exhibits one of
the following states:
6.
The charge station will be in standby (
if the vehicle is fully charged or scheduled to charge
later.
7.
The charge station will begin charging (
).
5.2
Stop charging
You will generally end a charging session when charging is
complete (indicated by the charge station status indicator
being in standby state (
), but you can also in-
terrupt and end an incomplete charging session.
To stop a charging session:
1.
Unlock and remove the coupler from the vehicle press-
ing the coupler button (typical in North America) or
follow the vehicle direction to disengage the vehicle
lock on the coupler (typical in Europe). The charge
station should return to Power On state
(
).
2.
Close the vehicle charge port cover.
3.
Wrap the loose cable around the remote dock.
4.
Plug the coupler into the remote dock.
5.
Lock (
) the charge station if desired.
8
5.3
Features
Features available (see the FordPass app for functions and
uses)
– Access Control (lock/unlock)
), unlock
– Charging Insights
– Maximum Charge Current Setting
– Station Sharing
This product will continue to evolve and new features will be
released over time.
l The charge station is capable of over-the-air firmware
updates when connected to the Internet through Wi-Fi.
l The charge station does not require Wi-Fi to charge your
vehicle, but Wi-Fi does enhances its capabilities.
If there is an Internet connection, the Ford Connected
Charge Station will perform automatic software updates.
)
Please note that the HMI display will cycle through different
animations including a solid red light (see example below).
Updates may take 10-15 minutes.
5.4
Status indicator
State
Status
Description
indica-
tor
Unpowered
Off
Power On
Blue, center sin-
gle LED, solid
LJ98-10C823-AC / LJ98-10C823-AD
State
Standby
Charging
Locked
Plugging In
Update/Re-
booting
Self-Check
mode
Charging Re-
duced (Over-
heating)
Explanation
Station Error
State
The charge station
is not powered.
The charge station
is powered and un-
locked (default
state).
Ford Connected Charge Station Operation Manual
Status
Description
Explanation
indica-
tor
Blue, full bar,
The charge station
solid
is receiving power
and is ready to
charge the vehicle.
Blue, full bar,
The charge station
pulsing
is successfully
charging the vehi-
cle.
Blue, center
The charge station
single LED, in-
is powered and is
termittent
locked and will not
charge until un-
locked.
White, full bar,
The charge station
cycling to mid-
is connecting to the
dle
vehicle, preparing to
charge.
White, wipe
The charge station
left to right
is downloading
firmware or reboot-
ing after changes to
settings.
White, full bar,
The charge station
solid
is checking that all
status indicators
are working.
Amber, full bar,
The charge station
solid back-
is charging at a re-
ground. Blue,
duced rate due to
center, pulsing
overheating.
Amber, full bar,
The charge station
solid
has a fault and re-
quires trouble-
shooting. See the
app for details.
