Sony MV-65ST Manual De Instrucciones página 27

Select ing t he color syst em
for t he input video signal
The player detects the color system of the
input video signal (NTSC or PAL) and changes
the setting automatically (auto mode).
Do the steps below to change the color system
setting for the input video signal manually.
1
Press (POWER) to turn on the player.
The current input channel (DVD) appears
on the screen for 5 seconds.
2
Press (VOL) +/ – on the monitor
repeatedly to select "NTSC" or "PAL."
Note
When changed manually, color syst em set t ing f or
t he input video signal does not ret urn t o aut o
mode unt il t he player is t urned of f or input
channel set t ing is changed. Theref ore, w hen it is
set t o " PAL," t he DVD recorded in NTSC syst em
cannot be view ed on t he monit or of t he player
unless you t urn of f t he player, t hen t urn it on
again.
Downloaded from: https://www.usersmanualguide.com/
Set t ings by using t he
M ENU but t on on t he
m onit or
You can make settings for the monitor and
frequency for the FM transmitter by using
(MENU) on the monitor.
Each time you press (MENU), the setting
screen changes in the following sequence:
Picture t Brightness t Color t Hue*
Dimmer t Video Adjust t Mode t FM
Transmitter t Blue Back t Menu Off.
1
" Hue" appears only w hen t he NTSC color syst em
*
is select ed as t he input source (page 27).
Note
While making t he f ollow ing set t ings, t he VOL +/–
but t ons on t he card remot e commander can be
used t o adjust t he volume.
Adjust ing t he cont rast
1
Press (MENU) on the monitor.
The "Picture" screen appears.
2
Press (VOL) +/ – on the monitor
repeatedly to adjust the contrast.
The settable range is 0 to 63, and the default
setting is 32.
When 5 seconds elapse with no button
pressed, normal display resumes.
1
t
27