3
Product description
The B70/1DCHP 36 V digital control unit uses a high resolution encoder for the sensored power control of ROGER
sliding gate leaf automation systems.
Ensure that the parameter A1 is set correctly. If this parameter is not set correctly, the automation system
may not function properly.
ROGER TECHNOLOGY cannot be held responsible for any damage or injury due to improper use or any use other than
the intended usage indicated in this manual.
recommend installing F4ES or F4S series photocells.
For further information, refer to the installation manual of the BG30 automation system
4
Updates of version P2.35
1. Added management of a new high-speed motor model (
2. Fine-tuned the stroke programming procedure.
3. Optimised the management of the parameters when they are changed by B74/BCONNECT.
4. Improved the management criterion for battery operation; adjusted the battery voltage thresholds (par.
5
Technical characteristics of product
MAINS POWER VOLTAGE
MAXIMUM MAINS POWER
ABSORPTION
INRUSH POWER
FUSES
CONNECTABLE MOTORS
MOTOR POWER SUPPLY
MOTOR TYPE
MOTOR CONTROL TYPE
RATED MOTOR POWER
MAXIMUM MOTOR POWER
MAXIMUM POWER,
FLASHING LIGHT
FLASHING LIGHT DUTY CYCLE
MAXIMUM POWER
GATE OPEN LIGHT POWER
MAXIMUM ACCESSORY
CURRENT ABSORPTION
OPERATING TEMPERATURE
SOUND PRESSURE
DURING USE
PRODUCT DIMENSIONS
(1)
BG30/1603/115 - BG30/1604/115 - BG30/2203/115 - BG30/2204/115 - BG30/1003/HS/115 -
BG30/1004/HS/115 - BG30/1504/HS/115- BG30/1804/HS/115 - BG30/803/HS/115 - BG30/804/HS/115
The total of the absorption values of all the accessories connected must not exceed the maximum power values
shown in the table. The values are guaranteed with original ROGER TECHNOLOGY accessories ONLY. The use of
non-original accessories may lead to malfunctioning. ROGER TECHNOLOGY declines all responsibility for incorrect or
non-conforming installations.
All the connections are protected by fuses (refer to the table). The courtesy light requires an external fuse.
BG30/1603
BG30/2203
BG30/1003/HS
BG30/1004/HS BG30/1404/R BG30/1504/HS BG30/1804/HS
BG30/1604
BG30/2204
230 V~ ± 10% 50 Hz (115 V~ ±10% 50/60 Hz)
180 W
190 W
200 W
390 W
470 W
590 W
F1 = 20A (ATO257) motor power circuit protection
F2 = T2A (ATO257) primary transformer protection
F3 = 3A(5x20 mm) accessories power supply protection
1
36V~, with self-protected inverter
sinusoidal drive brushless (ROGER BRUSHLESS)
85 W
100 W
140 W
350 W
420 W
530 W
25 W
50%
100 W 230 V~ - 40 W 24 V~ /
3 W (24 V
)
20 W (24 V
)
-20°C
+55°C
<70 dB (A)
dimensions in mm 200x90x45 Weight: 0,244 kg
).
(1)
190 W
240 W
540 W
650 W
120 W
160 W
480 W
590 W
(potential free contact)
) combined with the use of
BG30/803/HS
BG30/804/HS
230 W
220 W
650 W
620 W
160 W
140 W
590 W
560 W
53