Idiomas disponibles
Idiomas disponibles
1 x
Foam backing pad
(Article 29 098,
Ø 50 mm)
1 x
Lambskin polish-
ing disc (Article
28664)
1 x
Polishing sponge
medium hard
(yellow,
article 29094,
Ø 50 x 25 mm)
1 x
Polishing felt,
medium hard
(article 28666)
12 x
Super-fine
sanding discs
grain 2000
(article 28670)
A microfibre cloth is also included with the WP/E for
final cleaning of polished surfaces.
Further details with more detailed information can
be found either in our device catalogue, in well-
assorted retail stores or on the internet at
www.proxxon.com.
6 Working with the device:
• Ensure the work piece is fixed securely! Loose work
pieces should be clamped in a suitable fixture. This
prevents the work pieces from flying about.
• A correct and uniform speed achieves a high perfor-
mance, not excessive contact pressure! Excessive
pressure is to be avoided: it only stresses the device
and can even damage the bits and cutters!
• Hold the device without covering the ventilation
slots. If it overheats, you absolutely must shut off the
device and allow it to cool down.
Workpiece cleaning:
Naturally enough, it is essential that a dirty workpiece
be cleaned thoroughly prior to polishing! Use of sand-
paper is helpful here. Appropriate sanding sheets with
a touch fastener layer are available in our range
(www.proxxon.com).
With full-surface rigid foam self-adhesive pad.
Of high quality, dense lambskin for polishing
scratch-resistant paintwork. With hook and loop
quick fastener Ø 50 mm.
For applying the polishing emulsion to painted and
metal surfaces followed by gradual polishing.
Ø 50 x 25 mm (tapered).
For polishing metals (e.g. stainless steel, brass and
copper). With hook and loop quick fastener
Of silicon carbide. For adding finishing touches to
paint or removing varnish runs and inclusions. With
hook and loop quick fastener. Ø 50 mm.
Polishing:
Warning:
Please ensure that the polishing tool is in a perfect con-
dition and not worn or damaged. Parts can break off
and fly about if polishing tools are worn or damaged.
This could result in injuries.
Please note:
Never work without polishing agent! Please note that
the ingredients of different polishing agents play a
decisive part in achieving the polishing effect, not the
mechanical action of the polishing tool!
Therefore, the choice of polishing agent, whether emul-
sion, wax or paste, is decisive if the desired result is to
be achieved. Please ensure that the correct agent is
selected for the material to be polished and the respec-
tive working stage.
Included with your PROXXON polisher is one tube each of
25ml SONAX Polish 1 and SONAX Finish 2. This professional
two-stage polish solution is particularly suitable for treating
weathered, scratched or pre-sanded paintwork.
Stage 1 Polish:
(high degree of abrasion-low degree of gloss) Use on
painted surfaces with lambskin hood, on unpainted
metals with polishing felt wheel. Slightly reduced
degree of abrasion when using the polishing sponge.
- 15 -
