Idiomas disponibles
Idiomas disponibles
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
-
Air cooler
-
Remote control
-
1 cooler
-
Remote control battery (2025)
-
Instruction manual
3. OPERATION
Filling up the water tank
Fig. 4
1. Make sure the cooler is not plugged to a mains socket.
2. Turn the water tank lock 90° to open it.
3. Remove the water tank and fill it with water.
4. Reinsert the water tank and turn the lock 90° to prevent water spillage.
NOTE:
-
Before using the air cooler, make sure that there is enough water in the water tank.
-
When filling the tank, make sure that the water level does not exceed the Max mark. Fig. 5
-
When the air cooler detects that there is no water, it will beep three times in succession. In
addition, the water pump will stop running and the cool function indicator light will flash
for 20 seconds (at an interval of 1.5 seconds).
ENERGYSILENCE 5000 COOL WAVE
ENGLISH
41
