Waeco CoolFun CK40D Hybrid Instrucciones De Uso página 21

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
CK40D Hybrid
Do not leave the cooler unit open for longer than necessary.
5.2
Using the coolbox
NOTICE! Risk of damage
A
Only operate the device from a single energy source. Simulta-
neous use of the thermoelectric cooling system and the com-
pressor is not permitted.
Ensure that the objects or goods placed in the cooling device
are suitable for cooling to the selected temperature.
Ensure that food or liquids in glass containers are not exces-
sively refrigerated. Liquids expand when they freeze and can
therefore destroy glass containers.
Ensure that your cooler is well ventilated so that any heat creat-
ed can dissipate. Otherwise proper functioning cannot be en-
sured. It is especially important not to cover the air vents.
Place the coolbox on a firm base.
Connection cable plug
12 V
Connecting the cooler to 12 V (thermoelectric mode)
NOTE
I
In thermoelectric mode, the thermostat has no function and the de-
vice cannot deep freeze.
Make sure the cable between the cooler and the battery is protected by a
fuse (maximum 5 A).
Plug the 12 V connection cable (see figure) into the cigarette lighter sock-
et or a 12 V socket in the vehicle.
The cooler starts cooling the interior.
To switch off the cooler:
– Disconnect the plug.
– Wind the cable around the two holders on the back of the device for
storage.
EN
230 V
Operation
21
Tabla de contenido

Solución de problemas

loading

Tabla de contenido