Technoline WT 250 Manual De Instrucciones página 5

6. Press the TIME SET key again and the "month" digits will start flashing, press the UP or DOWN
key to adjust the month.
7. Press the TIME SET key again and the "date" digits will start flashing, press the UP or DOWN key
to adjust the date.
8. Press the TIME SET key again and then press the UP or DOWN key to set the time zone, e.g.
when the country time is faster than DCF time for 1 hour, the zone should be set to +1.
9. Press the TIME SET key again and then press the UP or DOWN key to choose the language for the
Day of week.
10. Press the TIME SET key again to return to normal display.
ALARM SETTING:
1. Press the ALARM Set key.
2. Press and hold the ALARM SET key for 3 seconds and the "minute" digits of alarm time will start
flashing, press UP or DOWN key to adjust the minute.
3. Press the ALARM SET key again and the "hour" digits of alarm time will start flashing, press UP
or DOWN key to adjust the hour.
4. Press the ALARM SET key again to return to alarm time display.
5. Press the ALARM ON/OFF key once to activate alarm on function and twice to activate snooze
function. Press the ALARM ON/OFF key once more, the alarm on function will be inactivated.
6. Press TIME SET key to return to normal display mode.
FUNCTION KEYS
SNOOZE/LIGHT KEY
-When the snooze alarm beeps, press the SNOOZE/LIGHT key to pause the alarm for 5 minutes and
the snooze function can be used repeatedly.
To stop snooze function, just press other keys once.
-Press the SNOOZE/LIGHT key to illuminate the LCD for 3 seconds.
C/F KEY
-In normal time display, press the C/F key to toggle between Celsius and Fahrenheit temperature
readings.
12/24 KEY
-In normal time display, press the 12/24 key to toggle between 12h and 24h display.
WAVE KEY
-In normal time display, press and hold the WAVE key for 3 seconds to activate the DCF scanning
function.
-If the clock is scanning for the DCF signal, press the WAVE key once to inactivate the DCF scanning
function.