RIDGID R860451 Manual Del Operador página 11

Idiomas disponibles

Idiomas disponibles

OPERATION
„ Install cutting wheel and grinding guard with cutting
guard.
„ Install the battery pack.
„ Hold the tool in front and away from you with both hands,
keeping the cutting wheel clear of the workpiece.
MAINTENANCE
WARNING
When servicing, use only identical replacement
parts. Use of any other part could create a hazard
or cause product damage.
WARNING
Always wear eye protection with side shields
marked to comply with ANSI Z87.1, along with
hearing protection. Failure to do so could result
in objects being thrown into your eyes and other
possible serious injuries.
WARNING
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning, perform-
ing any maintenance, or when storing the tool.
NOTE: ILLUSTRATIONS START ON PAGE 13
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy,
as well as a Three-year Limited Warranty. For Warranty and Policy details,
please go to powertools.ridgid.com or call (toll free) 1-866-539-1710.
„ Turn the tool ON and let the motor and cutting wheel
build up to full speed.
„ Move the cutting wheel into the workpiece.
NOTE: Do not force. Use only enough pressure to keep
the tool cutting. Let the wheel and tool do the work.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which could
result in serious personal injury.
REPLACING THE GUARD
See Figures 1 - 3, page 13.
After extended use, the guard may wear and need replacing.
If you drop the tool and damage the guard it may also be
necessary for you to replace it. Refer to Installing/Remov-
ing Grinding guard earlier in this manual.
11 - English
loading