Idiomas disponibles
Idiomas disponibles
Product description
Operating elements
1
2
1 On / off switch
2 Confirm button
3 Display
On / off switch
The on / off switch shows different states of the
unit:
Unit off
To start simply press the on / off
switch.
The unit switches on or is ready for use
The start screen appears as soon as
the unit can be used.
Confirm button
The Confirm button is used to confirm messages
on the display. The button flashes when a mes-
sage requiring confirmation is displayed.
Display
The display shows information provided by the
imaging software.
16
|
EN
Connections
The connections are located on the rear of the
3
unit, underneath the cover.
1 USB port (additional accessory)
2 Network connection
3 Reset button
4 Connection for power supply unit
SmartScan
With SmartScan an image plate is assigned to a
specific patient via the imaging software.
As soon as an image plate has been assigned to
a patient in the imaging software, all devices that
support SmartScan go into imaging standby.
Image plates that have previously been linked to
a patient can now be read in at any device in any
order. The images are then automatically
assigned to this patient by the imaging software.
SmartScan functions with the following imaging
programs:
– Vet-Exam Pro from DÜRR MEDICAL
5.2
The image plate stores X-ray energy, which is re-
emitted in the form of light after excitation via the
laser. This light is then converted to image infor-
mation in the image plate scanner.
The image plate has an active side and an inac-
tive side. The image plate must always be
exposed on the active side.
When used properly, image plates can be
exposed, read and erased several hundred times
provided there is no mechanical damage. The
image plate must be replaced if there are any
signs of damage, e.g. if the protective layer is
damaged or there are visible scratches that could
interfere with the diagnosis.
1
2
3
4
Image plate
2137100008L02
2311V001
