Specifications - Panasonic AW-PH400E Manual De Instrucciones

Pan/Tilt Control Panel AW-RP400

Specifications

Supply voltage:
Power consumption: Approx. 13 W
indicates safety information.
Input connectors
DC 12V IN:
CONTROL IN FROM ROP:
CONTROL IN FROM RCB:
EXT CONT IN:
REMOTE:
Output connectors
CONTROL OUT TO
PAN/TILT HEAD:
MONI SEL OUT:
EXT CONT OUT:
Input/output connectors
INCOM (top panel):
TALLY/INCOM:
Switch functions:
Adjustment functions:
Ambient operating temperature: –10 °C to +45 °C
Storage temperature:
Ambient operating humidity:
Dimensions (W V H V D):
Mass (weight):
Finish:
Mass (weight) and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
DC 12.0 V
XLR, 4 pins
D-SUB 29-pin, cable supplied with remote operation panel (AW-CB400)
10-pin round connector, cable supplied with remote control box (WV-CB700A)
RJ45, additional AW-RP400 control signal input; 10BASE-T straight cable (UTP category 5),
max. 500 meters
50-pin D-SUB connector, external control input, RS-232C cable (AW-CA50T9)
RJ45, pan-tilt head control signal output; 10BASE-T straight cable (UTP category 5),
max. 500 meters
RJ45, monitor switching signal output; 10BASE-T straight cable (UTP category 5),
max. 50 meters
RJ45, additional AW-RP400 control signal output; 10BASE-T straight cable (UTP category
5), max. 500 meters
XLR, 4 pins
D-SUB, 15-pin
TALLY: Contact input (Do not apply a voltage in excess of 5 V to this connector.)
INCOM: 4-wire system
Master/slave switching, OPERATE control, home position, menu/limiter switching, optional
function operations, pan-tilt head selection, lens iris AUTO/MANU/LOCK switching, preset
memory data operations, tracing memory data operations, call
LCD contrast, INCOM level, lens iris, zoom, focus, pan/tilt/rotation, zoom speed,
focus speed, pan speed, tilt speed, rotation speed, menu settings
–20 °C to +60 °C
30 % to 90 % (no condensation)
320 M 85 M 266 mm
Approx. 3.8 kg
Colour resembling Munsell 3.5 paint
45 (E)