9. INSTALLATION
The microwave can be fitted in position
A, B, C or D:
9.1 Installing the appliance
4 mm
Position
A
B+C
D
Measurements in (mm)
1. Remove all packaging and check carefully for
2. This oven is designed to fit into a
4 mm
4 mm
3. Fit the fixing hooks to the kitchen cupboard
4. Fit the appliance into the kitchen cupboard
5. Ensure the appliance is stable and not
Niche size
W
562 x 550 x 360
462 x 300 x 350
462 x 300 x 360
562 x 300 x 350
562 x 300 x 360
462 x 500 x 350
462 x 500 x 360
562 x 500 x 350
562 x 500 x 360
any signs of damage.
360 mm high cupboard as standard. When
fitting into a 350 mm high cupboard:-
Unscrew and remove the 4 feet from the
bottom of the oven. There are 3 tall feet and
1 short foot. Replace the 3 tall feet with those
provided in the accessory pack. Do not
replace the short foot.
using the instruction sheet and template
supplied.
slowly, and without force. The appliance
should be lifted onto the fixing hooks and
then lowered into place. In the case of
interference during fitting, this hook is
reversible. The front frame of the oven should
seal against the front opening of the
cupboard.
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and the
top of the frame (see diagram).
ENGLISH
163
D
H