Custom Programs - cefar PRIMO PRO Manual De Instrucciones

CUSTOM PROGRAMS

With the CEFAR PRIMO PRO it is possible to create and store three custom programs for individual
52
needs. To create a custom program follow the programming procedure below. To use a custom pro-
gram, follow the instructions in the section STEP-BY-STEP USE. The program time is preset to 30 min-
utes but can be changed with the timer function, see section TIMER.
Programming
Use the left side buttons of the stimulator to do the programming for the left channel and the right side
buttons for the right channel.
1. Press the PROGRAM button
Select one of these programs.
2. Press the PROGRAMMING/CONFIRMATION button
ming mode.
3. Press the INCREASE (OR DECREASE) button
types alternate on the display: C, B, PWM, FM, MF. The programming chart below shows the setting
possibilities for each stimulation type.
4. Press the PROGRAMMING/CONFIRMATION button
type. You are now moved to the next stage in the programming procedure (see the programming
chart).
5. A preset value is shown on the screen, but you can change it by pressing the INCREASE (OR
DECREASE) button
6. Press the PROGRAMMING/CONFIRMATION button
moved to the next stage (if any) in the programming procedure (see the programming chart).
7. Repeat step 5 and 6 until the value in the last stage is set.
8. The programming procedure is finished and you will automatically exit the programming mode. The
new program is now selected in the channel you used for programming and ready for use.
The program is saved for future use and can be used on both channels.
A custom program can be changed by redoing the programming.
AUTO AUTO
repeatedly until Program 8, 9 or 10 is shown on the display.
S
P
AUTO
P
AUTO
P
P
. The valid range for this value is shown in the programming chart.
AUTO
P
AUTO AUTO
S
P
AUTO
for 2 seconds to enter the program-
S
repeatedly to see the different stimulation
AUTO
AUTO AUTO
to confirm your choice of stimulation
S
S
AUTO
to confirm your setting. You are now
S