Timer; Program Pause - cefar PRIMO PRO Manual De Instrucciones

TIMER

You have the option to change the timing from "- -" to 60 minutes. If you choose to stay on "- -", the
stimulation will go on until you stop the stimulation manually. The preset treatment time for Program
1–5 and 7 is set to "- -" minutes and for Program 6 to 10 minutes, but an integrated timer allows you to
set the treatment time yourself.
When setting the timer, use the left side buttons of the stimulator for the left channel and the right side
buttons for the right channel.
To set the timer:
1. Select a program and start the stimulation, see section STEP-BY-STEP USE.
2. Press the PROGRAMMING/CONFIRMATION button
timer function.
3. Increase the time by pressing the INCREASE button
time you press the button. Decrease the time by pressing the DECREASE button
decreased by 1 minute each time you press the button. The time is flashing on the display, while set-
ting the timer.
4. Press the left/right PROGRAMMING/CONFIRMATION button

PROGRAM PAUSE

You can pause the programs up to 5 minutes.
To pause a program:
1. If key lock is on, press any of the DECREASE buttons
2. Press any of the PROGRAM buttons
Start stimulation again by pressing any of the PROGRAM buttons
If the channels are paused for more than five minutes, the stimulator turns off automatically to spare
batteries.
AUTO AUTO
on the active channel to initiate the
S
P
. The time is increased by 1 minute each
AUTO AUTO
AUTO
S
P
P S
to deactivate it.
AUTO AUTO
to pause the program for both channels.
S
P
P
AUTO
P
. The time is
AUTO
AUTO
to confirm the timer setting.
P
AUTO AUTO
.
S
AUTO
S
47
AUTO
S