Operation; Step-By-Step Use - cefar PRIMO PRO Manual De Instrucciones

5. OPERATION

STEP-BY-STEP USE

44
1. INSERT THE BATTERIES
Insert the batteries (see chapter REPLACEMENT OF BATTERIES).
2. ATTACH THE ELECTRODES
A. Connect the electrodes to
the cable.
3. SWITCH THE STIMULATOR ON
Press the ON/OFF button
minating the stimulation at all times, even when the key lock is acti-
vated.
Always switch the stimulation off before removing electrodes from
the skin.
4. SELECT A PROGRAM (1-10)
Press the PROGRAM button
repeatedly until the program of your choice is shown on the display.
If you want to use both channels, then select a program for the other
channel. Any combination of programs is possible except for Program
7, which must be selected for both channels.
Note! When selecting programs the amplitude must be set to 00.0
mA for both channels.
For further information on the programs, see section PRESET
PROGRAMS.
B. Attach the electrodes to
your body.
. This button can be used for ter-
AUTO AUTO
P S
AUTO AUTO
for the left or right channel
S
P
C. Connect the cable to the
CEFAR PRIMO PRO.