Idiomas disponibles
Idiomas disponibles
CARE ANDCLEANING
RemovableParts
BULB
LIVE COLLAR
;KET
BULB COVER
BAiL WiRE
TO REMOVE
THE COVER:
1. Disconnect
electrical
power to the
oven at the main circuit breaker or
fuse box.
2, Hold your hand under cover and
firmly push back the bail wire, until
it clears and releases the bulb
cover.
REPLACE
THE LIGHT
BULB:
Unscrew the light bulb and replace it
with a 40-watt home appliance
bulb
TO REPLACE
COVER:
1, Place the bulb cover into the
groove of the bulb socket.
2, Pull the bait wire forward unti! it
snaps into the indentation on top of
the bulb cover.
,!t, Reconnect the electrical
power to
the oven.
-_
I}11_
:
.
Ill"' Ill
1_II
""IIiI{,Vl"
Do not touch
a hot
oven
light
bulb. Do
not touch
a bulb with
wet
hands
or wet
cloth.
Never
touch
the elec-
trically
live collar
on the
bulb when
removing
or re-
placing
the bulb.
Do not re-
move
any screws.
TO REMOVE:
Open the door to the broil stop
position, Grasp the door on each side
and lilt up and off the hinges,
DO
NOT LIFT
THE DOOR
BY THE
HANDLE.
/_
-_f_When
the door is re.
moved
and the hinge
arms
are in the broil
stop
position,
do not
bump
into the
hinge
arms.
They
could
snap
back
and
cause
injur),
to hands
and
damage
the
porcelain
finish
of the front
frame=
Cover
the
hinge
arms
with
empty
pa-
per towel
rolls
or towels
while
working
in the oven
area,
TO REPLACE:
Remove the paper towel rolls or
towels. Make sure the hinges are
still in the broil stop position.
Grasp
the door on each side. Lift the door
over each hinge. Line the slots at
the bottom of the door with the
hinges.
Slide the door down over
the hinges
as far as it will go.
