Idiomas disponibles
Idiomas disponibles
OPERATION
ClockandKitchen Timer
To change the time of day, all lower
oven controls must be off.
When power is first connected
to your
cooking center or after a power
failure, the digital display on both the
microwave and the lower oven control
will show lighted 8's and t8's and all
oven functions for about 15 second&
Then all lights go off and "RESET"
and "PF" appear in the lower display.
(Clock
must
be set before
the
lower
oven
control
will work,}
1. Press the CLOCK
pad
2, Press the numbers pads
to set the time of day.
3. Press the START
pad.
To check the time of day when the
display is showing other information,
Press the CLOCK
pad. The time of
day will show as long as the Clock
pad is held down.
The Timer can be set up to 1t hours
and 59 minutes. The Timer counts
down in minutes until the last minute
is reached, then seconds are dis-
played. When the timer reaches zero,
"TIMERt'
flashes in the display.
The smallest amount of time you can
set is 1 minute.
The timer
does
not control
oven operations,
The CLEAR/
OFF pad wil! not cancel
the
1.
Press the TIMER
ON/
OFF pad
2,
Press the number pads
to set the amount of
time you will need,
3.
Press the START
pad.
If you make a mistake
while
setting
or
want to change
the time, press
the
TIMER
ONIOFF
pad twice
to reset
the timer.
The Timer will immediately
start to
count down, After ! minute has
passed the display will change,.
When time countdown
is complete,
the control wil! beep four times and
the display will flash° Press the
TIMER
pad to cancel,
To cancel the timer at any time, press
the TIMER
pad.
When you black out the display, the
Clock will maintain the correct time of
day It will reappear for the duration of
any function that displays a start and
stop time.
1, Press and hold, at the same time,
the CLOCK
and STOP
TIME
pads until the display goes blank.
To make the time of day reappear
press the CLOCK
pad_
!7
