Zodiac FLUIDRA POOL Z260iQ Guia De Inicio Rapido página 8

4
User functions
Lock/Unlock
the keypad
3 seconds
Setting the time (clock)
Press twice.
flashes.
Adjust the temperature setpoint
Unlock the keypad (3 s)
Select an operating mode
ATION (ELECTRONIC CONTROLLER)
The heat pump has 3 active operating
modes for adjusting its operating
speed to the power that is required
and the mode that is selected:
• ''BOOST'' mode
• ''SMART'' mode
• ''ECOSILENCE'' mode
• ''AUTO'' mod
Set temperature
Water temperature
Deactivate the heat pump
Unlock the keypad (3 s).
p and Locking
Refer to the online manual for
further details about operating
3s to unlock the control box.
modes.
8
2s to turn the heat pump on or off. This button is also used to return to the main interface.
ck activates automatically after 60 seconds of inactivity). When the cabinet is locked, the logo
-->
Press the arrow button to
set time, then SET to set
the hours.
Check that the compressor
is working:
The operating mode icon
displays.
Unlock the keypad (3 s). Then
press SET.
The icon
Press 2 s. The heat pump's
compressor will stop after
few minutes
/
Press to change.
Press to validate. Push SET
again and do the same for
minutes.
/
Modify the temperature.
The operating mode icone
blinks.
Deforsting
Navigate through the
available modes.
displays.
The icon disappears when
the compressor is not
working.
❷ Use
Press for 1 second to confirm.
Recommended
temperature: 28 °C
Press to select.
Press 2 s to start.
Press 2 s to restart the
compressor.
appears.