Idiomas disponibles
Idiomas disponibles
3
User interface
REGULATION (ELECTRONIC CONTROLLER)
Heating /Auto/
Cooling mode
Set time (clock)
Setpoint water
temperature
Set temperature
Parameters
Water temperature
SET (setpoint water
temperature /
parameters)
Start-up and Locking
Press
3s to unlock the control box.
Icons
Press
2s to turn the heat pump on or off. This button is also used to return to the main interface.
The lock activates automatically after 60 seconds of inactivity). When the cabinet is locked, the logo
Operating Modes
Press the button
to change the operating mode:
Then press
to change the operating mode press
again to validate the change and return to the main
menu.
ECO Heating mode:
theheat pump operates silently.
SMART Heating mode:
theheatpumptooperate in a conventional manner
BOOSTheating mode:
that the heat pump quickly heats the water in your pool.
AUTO
Automode:Theheat pump intelligently chooses the most
appropriateoperating mode according to the setpoint temperature.
SILENTCoolingmode:Choose this cooling mode for
theheat pump to operate silently.
ECO Cooling mode:
the heat pump operates in a conventional manner.
BOOST Cooling mode:
theheatpump to operate in a classic way.
Lock
Error
Browse/
Return
Mode
ECOSILENCE
Heating
SMART
Choose this heating mode so that
BOOST
Choose this heating mode for
Heating/
Choose this heating mode so
SMART
Cooling
(recommended mode)
ECOSILENCE
Choose this cooling mode so that
SMART
Cooling
Choose this cooling mode for
BOOST
Current time
(clock)
Validate/
Browse
Return
Description
Reduced power to further energy savings and lowest noise
Setting the required temperature
level. Best to maintain the temperature when outside air
temperature is warm.
Automatic power adjustment depending on the need.
Chooses between ECOSILENCE and BOOST modes
automatically.
Maximum power for fast heat-up. Best at the beginning of
the season to rise up the temperature or to maintain the
temperature when the outside temperature is cold.
The heat pump intelligently chooses the most
appropriate operating mode according to the setpoint
temperature.
Cooling the pool at reduced power to further energy savings
and lowest noise level.
pressing
.
Step 4: Change hours/minutes by using
Automatic power adjustment depending on the need.
Chooses between ECOSILENCE and BOOST modes
Step 5: Press the button
automatically.
and return to the main menu.
- 24 -
Cooling the pool at maximum power for fast cooling.
Defrosting :
automatic and mandatory
Deforsting
process for the good operation of the
heat pump
Wi-Fi
Timer On/Off
Inverter mode
(left: ECOSILENCE, middle:
SMART, Right: BOOST)
Water inlet temp
Compressor running
Fan running
Filtration pump running
These 3 icons can be off if heating/
cooling is not needed (normal
behaviour)
appears.
Step 1: Go to the main menu
by unlocking the control panel.
Step 2: Press the
and
buttons to change the set
temperature.
Clock setting
Step 1: Go to the main menu
by unlocking the control panel.
Step 2: Press
2 times to
enter
the clock setting interface.
The clock display flashes.
Step 3: Press
to switch from
hours to minutes and validate by
and
1s to confirm the setting
❷ Use
.
7
