Idiomas disponibles
Idiomas disponibles
Liquid or powdered color-safe bleach may be added to the
Main Wash compartment
along with the same type of
detergent, liquid or powdered.
Liquid detergent: Put the separator in the front position,
between the guides, as shown following. There will be no gap
between the bottom of the wash cycle detergent
compartment
and the bottom of the separator.
[] POWDER
_
PREWASH ZL
_
MAINWASHV
LIQUI
S(
Separator
in front
position,
between
guides
A. Separator
B. Guide
Powdered detergent: Put the separator in the back position,
behind the guides, as shown following. There will be a gap
between the bottom of the wash cycle detergent
compartment
and the bottom of the separator.
A
¸
[]
POWDER
_
PREWASHA
I
I II<uO.,D I
UQUI
S(
2V
Separator in back position, behind guides
A. Separator
B. Guide
NOTE: The separator will be in the powder (back) position when
shipped from the factory.
Chlorine
bleach compartment
(Letter E in Dispenser Illustration)
Add no more than 1/3cup (80 mL) liquid chlorine bleach to this
compartment.
The bleach will be automatically
diluted and
dispensed at the best time during the first rinse after the wash
cycle. This compartment
cannot dilute powdered bleach.
•
Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess. Follow the manufacturer's
directions for safe use.
•
Do not fill beyond the "MAX" level.
NOTE: Overfilling could cause severe garment damage.
Fabric softener
compartment
(Letter F in Dispenser Illustration)
Add 1/4cup (60 mL) liquid fabric softener to this compartment.
Fabric softener will be automatically
dispensed
in the final rinse.
•
Do not fill beyond the "MAX" level.
1.
2.
_
_
_
_,__ _ ,_C_
_
_ p,_
To pause the washer at any time, select PAUSE/CANCEL.
To continue the cycle, select and hold START (for
approximately
1 second).
Not all Options and Modifiers are available with all Cycles.
Cycles, Options and Modifiers can be changed anytime before
START is selected.
Options and Modifiers can be changed anytime after START is
selected and before the start of the selected Option or Modifier.
To cancel a cycle and select a new cycle
1. Select PAUSE/CANCEL twice.
2. Select desired cycle.
3. Select the desired OPTIONS and MODIFIERS.
4. Select and hold START (for approximately
1 second) to restart
the washer at the beginning of the new cycle.
To cancel a cycle
1. Select PAUSE/CANCELtwice.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: If the water level or the temperature
is too high, the
washer will drain automatically
before the door unlocks.
To change Options
or Modifiers after the cycle has started
1. Select PAUSE/CANCEL once.
2. Select the desired OPTIONS or MODIFIERS.
3. Select and hold START (for approximately
1 second) to
continue the cycle.
To drain the washer
manually
1. Select PAUSE/CANCEL once.
2. Select DRAIN & SPIN.
3. Select and hold START (for approximately
1 second) to begin
the drain.
4. When the spin is complete, the door unlocks. Items can be
removed from the washer.
14
