Dometic TD283 Guía De Instalación Y Funcionamiento página 10

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Pos. in A Compo-
Description
nent
8
Cleaning and maintenance
NOTICE! Damage hazard
Do not use abrasive cleaning agents or hard objects during cleaning as these may damage
the device.
Do not use cleaning agents that contain ammonia or alcohol.
Never spray or pour liquid directly onto the touchscreen or casing.
8
Solar charge controller menu
The following is displayed (see Fig. , C):
Current value for voltage (in V) of the starting battery (1)
Hist.
Open
for an overview of the solar energy delivered over the last 3 weeks.
(2)
Daily output (in Wh) of connected solar panels (3)
Status of the solar charge controller (Standby/MPPT/Absorption/Float/Off) (4)
State of charge of the house battery (circle diagram in 5/25 % steps) with current
values for voltage (in V) and current (in A) (5)
Battery charger menu
The following is displayed (see Fig. , D):
Status of the battery charger (Standby/Bulk/Absorption/Float/Off) (1)
Voltage (in V) of the starting battery (2)
State of charge of the house battery (circle diagram in 5/25 % steps) with current
values for voltage (in V) and current (in A) (3)
House battery menu
The following is displayed (see Fig. , E):
Status of the battery (On/Off) and time to full charge/discharge (1)
Battery capacity in Wh (2)
Battery condition (maximum capacity in %) (3)
Analysis of the battery temperature (OK, High or Low) (4)
State of charge of the house battery (in %) with current values for voltage (in V) and
current (in A) (5)
If more than one battery is connected in the N-BUS network: Open
overview of the individual battery condition and battery temperature for up to 4
batteries in the network (not shown)
Inverter menu
The following is displayed (see Fig. , F):
Status of the inverter (On/Off) (1)
Maximum surge power (in W) and current output voltage (2)
State of charge of the house battery (in %) with current value for voltage (in V) (3)
Hist.
for an
loading