Idiomas disponibles
Idiomas disponibles
Initial Startup
Procedure:
1. Open DULCONNEX Blue on your mobile device.
2. Switch to the "Devices" view.
+
3. Tap on
.
All Bluetooth devices that are nearby are displayed.
4. Tap on + next to the sensor's name.
The sensor will be connected to the app. If the con-
nection is successful, a message appears.
5. Enter device PIN.
Note: The PIN is the last 4 digits of the sensor's serial
number.
The sensor is connected to the app and is displayed in
the "Devices" view in the "Connected" tab.
EN
14
Confi guration
Set up and Confi gure Sensor
In order to use the sensor, the following steps must be
performed after connection to the pump or PLC:
Calibrate tank size: Mapping of sensor distance
measurement to tank volume
Set alarms
For more information on confi guration,
also see the videos at www.prominent.
com.
Additionally, the following confi gu-
ration options are available in the
DULCONNEX Blue App:
Confi guration of analog output
Error logbook
Firmware updates
Copying confi gurations from one
tank to another
Commissioning report
