Idiomas disponibles
Idiomas disponibles
Laser Distance Meter/ English
Timer (self-triggering)
laser continuous
Stake out function
Display illumination and multi-line display
Multifunctional endpiece
Tripod thread
Beep indication
BLUETOOTH® 4.0
Range of BLUETOOTH®
BLUETOOTH® with Apple ipod/ iphone support
BLUETOOTH® with SPP support
Dust protect/ Splash proof
History measurement records
Keyboard type
Operating temperature
Storage temperature
Batteries
Battery life
Auto laser switch-off
Auto instrument seitch-off
Dimension
Weight
* Use a target plate to increase the measurement range during daylight
or if the target has poor reflection properties!
** in favourable conditions (good target surface properties, room
temperature) up to 10m (33 ft).In unfavourable conditions, such as
intense sunshine, poorly reflecting target surface or high temperature
variations, the deviation over distances above 10m (33ft) can increase
by ±0.15 mm/m (±0.0018 in/ft).
12
√
√
√
√
√
√
√
√
10m
√
√
IP54
20
Super Soft-Touch (Long life)
o
o
o
o
0
C to 40
C (32
F to 104
F)
o
o
o
o
-10
C to 60
C (14
F to 140
F)
Type AA 2 x 1.5V
up to 8,000 measurements
after 30 seconds
after 3 min
135 x 53 x 30mm
160g
7. Troubleshooting – Causes and Corrective Measures
Code Cause
Corrective measure
204
Calculation error
Repeat procedure
208
Received signal too weak,
Use target plate
measurement time too long.
Distance >50m
209
Received signal too strong
Target too reflective (use target plate)
252
Temperature too high
Cool down instrument
253
Temperature too low
Warm up instrument
255
Hardware error
Switch on/off the device several
times, If the symbol still appears,
please contact your dealer for
assistance.
8. Measuring Conditions
Measuring Range
The range is limited to 70m.
At night or dusk and if the target is in shadow the measuring range
without target plate is increased. Use a target plate to increase the
measurement range during daylight or if the target has poor reflection
properties.
Target Surfaces
Measuring errors can occur when measuring toward colorless liquids
(e.g. water) and dust free glass, Styrofoam or similar semi-permeable
surfaces. Aiming at high gloss surfaces may deflect the laser beam and
lead to measurement errors.
Against non-reflective and dark surfaces the measuring time may
increase.
Care
Do not immerse the instrument in water. Wipe off dirt with a damp, soft
cloth. Do not use aggressive cleaning agents or solutions. Handle the
instrument as you would a telescope or camera.
Laser Distance Meter/ English
13
