Idiomas disponibles
Idiomas disponibles
Such preventive safety measures reduce the risk of starting
the power tool accidentally.
Store idle power tools out of the reach of chil-
r
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
Maintain power tools and accessories. Check
r
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If dam-
aged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly main-
r
tained cutting tools with sharp cutting edges are less likely
to bind and are easier to control.
Use the power tool, accessories and tool bits
r
etc. in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the power tool for op-
erations different from those intended could result in a haz-
ardous situation.
Keep handles and grasping surfaces dry, clean
r
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and con-
trol of the tool in unexpected situations.
Service
Have your power tool serviced by a qualified
r
repair person using only identical replacement
parts. This will ensure that the safety of the power tool is
maintained.
Safety Warnings for Drills
Safety instructions for all operations
Hold the power tool by insulated gripping sur-
r
faces, when performing an operation where the
cutting accessory or fasteners may contact hid-
den wiring or its own cord. Cutting accessory or
fasteners contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator
an electric shock.
Safety instructions when using long drill bits
Never operate at higher speed than the max-
r
imum speed rating of the drill bit. At higher speeds,
the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
Always start drilling at low speed and with the
r
bit tip in contact with the workpiece. At higher
speeds, the bit is likely to bend if allowed to rotate freely
10
without contacting the workpiece, resulting in personal in-
jury.
Apply pressure only in direct line with the bit
r
and do not apply excessive pressure.Bits can bend
causing breakage or loss of control, resulting in personal in-
jury.
Additional safety warnings
Switch the power tool off immediately if the ap-
r
plication tool becomes blocked. Be prepared for
high torque reactions which cause kickback. The
application tool becomes blocked when it becomes
jammed in the workpiece or when the power tool becomes
overloaded.
Hold the power tool securely. When tightening and
r
loosening screws be prepared for temporarily high torque
reactions.
Secure the workpiece. A workpiece clamped with
r
clamping devices or in a vice is held more secure than by
hand.
Use suitable detectors to determine if utility
r
lines are hidden in the work area or call the
local utility company for assistance. Contact with
electric lines can lead to fire and electric shock. Damaging
a gas line can lead to explosion. Penetrating a water line
causes property damage or may cause an electric shock.
Always wait until the power tool has come to a
r
complete stop before placing it down. The applica-
tion tool can jam and cause you to lose control of the
power tool.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instruc-
tions. Failure to observe the safety and general
instructions may result in electric shock, fire and/
or serious injury.
Please observe the illustrations at the beginning
of this operating manual.
Intended Use
