Pulmic SPARK 25 Manual De Instrucciones página 15

Idiomas disponibles

Idiomas disponibles

VVHEN ENGINE FAILS TO START
Diagnoses
Causes
Drawing too much fuel.
There is power at the terminal
There is fuel, but spark
Faulty spark plug gap.
plugs fail to ignite.
Faulty spark plug insulation.
No power at the terminal.
Faulty TCI unit or broken wire.
Abreak or short in the ignition coil.
There is fuel and spark
Faulty packing or tightening.
plugs ignite.
Compression is bad.
Spark plugs not tightened property.
Piston rings are sticking.
No fuel in the tank.
.
Fuel valve is faulty or fuel tank air vent is
No fuel in the carburetor
plugged
Lines are bent.
ENGINE
SMOOTH
Diagnoses
Air cleaner element is plugged up.
Compression is good.
Air has entered fuel line joints.
Faulty choke lever.
No power.
Carbon buid-up on cylinder muffler.
Burnt spark plug.
Short in cable.
Bad mixture or piston ring wear.
Marks on cylinder, cracks in the piston head.
Compression is bad.
Fuel is too low ( misture is too thin).
Engine overheated.
Faulty mixture. Not enough mixture.
Carbon piled up. Overloaded operation.
Faulty spark plugs.
Plugged cylinder or coolant lines.
Carburator not adjusted properly.
Inaccurate explosion.
Faulty spark plugs.
Faulty magneto or internal short.
Overheated cylinders.
Overload operation.
Engine doesn't sound right.
Faulty mixture or incorrect radio.
Internal engine damage.
Carburetor not adjustable property or faulty
Slow acceleration.
Compression.
Poor gasoline oil quality.
Carbon pile-up.
loading