Pulmic SPARK 25 Manual De Instrucciones página 11

Idiomas disponibles

Idiomas disponibles

DILUTION OF CHEMICAL / CHARGING
TO THE CHEMICAL TANK
Caution: Agricultural chemicals are extremely dangerous, and must be handle and care. Read the manual for
the specific chemical carefully before use.
Dissolve water dispersible power in a separate container before filling. Be sure not to get foreing material into
the chemicals.
Close tight to seal
Chemical tank lid
e
Always fill the chemical tank through the strainer
so that contaminants are not mixed into the
chemicals.
Open the air bleed nozzle, and bleed untill the chemicals is draining out, and then close the nozzle securely.
Before spraying the agrochemical, be sure to put on suitable protective clothing to protec yourself against
contact with and breathing it. Observe the following cautions for safe operation:
a) Be sure to close the chemical tank cover securely.
b) Check the spray hose and nozzle connections to make sure there are no leakage.
c) Always stop the engine before refilling the fuel tank or changing the nozzle.
d) When carrying a full chemical tank, be careful not to lose your balance.
STARTING THE ENGINE
Important: When starting the engine, be sure to fill the chemical tank with pure water or chemical liquid.
Never run the engine when the chemical tank is empty.
Pump the primer bulb until fuel can be seen flowing through the fuel return line, and pull the choke lever to
full close. (During hot weather and when the engine is already warmed up, the choke lever may be set to
either half open or full open)
Set the throttle lever to the middle speed position (not necessarily to maximum)
The first starting attempt —
Choke lever: fully -
Matching mark at
N
STARTING
Pd
84,
ss
STARTING
A
Henacor
Nigh PRESSURE
y
Throttle lever
INA
a
Middle speed position
Fi MAD
Primer bulb
When the engine is
N
warm choke lever: fully open
Us
loading