Idiomas disponibles
Idiomas disponibles
plug
Dry plug
de
Width
5T
0.6 mm
ES
STORAGE
After using the sprayer for the season, store it until the next season of the use as follows:
a- Drain off all fuel from the fuel tank and the carburetor
b- Remove the Spark plug and coat the interior of the cylinder with a small amount of oil. Pull the recoil
starter lightly 2-3 times to spread the oil over the cylinder completely.
c- Pull the recoil starter out slightly
and stop it in place where you fuel
the pull start (compression start)
d- Clean the entire sprayer
completely, cover it so it does not
accumulate dirt and dust, and
store it in a dry, cool location.
2 - Apply a few drogs of oil
1 - Remove the plug
3- Pull 2 or 3 times
4 - Connect the plug
PROBLEMES
Trouble
Cause
Counter measure
No sucion
[__Wompiston packing, Replace
with new one
|
[_ Foreign objet in valve parts.
|
Disassembeandceen
|
spray
Flaw on cylinder inside surface.
Replace with new one
quality
Flaw on exhaust valve.
Replace with new one
|_Wom pressure control valve seat.
| Replacewihmewone
|
[__Wom pressure control valve handle.
| Replacewitimewone
|
[_ Foreign objet in valve parts.
| Disassembleandcleam
|
| _ Wom nozzle hole.
|| Replacewithnewone
|
Too many nozzle attached
Reduce number of nozzle or replace
with nozzle of smaller hole
