Hama Retro Instrucciones De Uso página 3

Warning - Batteries
• Do not burn batteries or heat them up.
• Never open, damage or swallow batteries or allow them to enter the environment. They can
contain toxic, environmentally harmful heavy metals.
• Remove spent batteries from the product and dispose of them without delay.
• Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric
pressures (such as at high altitudes).
• Ensure that batteries with damaged housings do not come into contact with
water.
• Keep batteries out of the reach of children.
4. Getting Started
Remove the battery that was already inserted into the clock, remove the protective lm if necessary as
well as the contact interrupter and the re-insert the battery with the correct polarity.
5. Operation
5.1 Setting the time
• Use the setting wheel on the rear to set the time (hours/minutes).
• To set the seconds, remove the battery to stop the seconds. Put the battery back in to start the
seconds hand again at the right second.
5.2 Setting the alarm
• Move the setting wheel on the back of the alarm clock in the direction of the arrow to set the
appropriate alarm time. The hand for the alarm time moves in an anticlockwise direction.
• To activate/deactivate the alarm, move the slide switch to the ON or OFF position.
6. Care and Maintenance
Only clean this product with a slightly moist, lint-free cloth, and do not use aggressive cleaning agents.
Make sure that water does not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from
improper installation/mounting, improper use of the product or from failure to observe the operating
instructions and/or safety notes.
8. Technical Data
"Retro" alarm clock
Power supply 1.5 V
1 x AA battery
a
3