Intended Use - Makita UM600D Manual De Instrucciones

Only for EU countries
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Noise
The typical A-weighted noise level determined according to EN62841-4-5:
UM600D/UH201D with shear blade for grass shear installed
Sound pressure level
L (dB(A))
pA
The noise level under working may exceed 80 dB (A).
The typical A-weighted noise level determined according to EN62841-4-2:
UM600D/UH201D with shear blade for hedge trimmer installed
Sound pressure level
L (dB(A))
pA
74
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-4-5:
UM600D/UH201D with shear blade for grass shear
installed
Vibration emission (a ) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-4-2:
UM600D/UH201D with shear blade for hedge trim-
mer installed
Vibration emission (a ) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
73
Guaranteed sound
power level
Uncertainty K (dB(A)) L
3
2
or less
2
2
or less
2

Intended use

UM600D with shear blade for grass shear installed
The tool is intended for cutting lawn edges or sprouts.
UH201D with shear blade for hedge trimmer
installed
The tool is intended for trimming hedges.
Uncertainty K (dB(A))
Measured sound power level
(dB(A)) L
wA wA
82
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
11 ENGLISH
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
3
(dB(A)) Uncertainty K (dB(A))
82 0.6