Proxxon RBS/A Instrucciones De Servicio página 11

Charger:
Mains voltage:
Output voltage:
Charging current:
Battery:
Rechargeable lithium-ion battery
Nominal/charging voltage: 10.8V/12.6V
Energy/Capacity:
3 Scope of delivery
Article 29830:
1 pc. Pipe belt sander RBS/A
1 pc. Connection adapter
1 pc. Rubber connecting piece
1 pc. Charger
1 pc. Battery
1 pc. Storage case
1 pc. Operating instructions
1 pc. Safety guidelines
2 pcs. Sanding belts K 80
2 pcs. Sanding belts K 180
2 pcs. Satin-fi nishing belts
Article 29832:
1 pc. Pipe belt sander RBS/A
1 pc. Connection adapter
1 pc. Rubber connecting piece
1 pc. Operating instructions
1 pc. Safety guidelines
2 pcs. Sanding belts K 80
2 pcs. Sanding belts K 180
2 pcs. Satin-fi nishing belts
4 Commissioning and operation
Caution!
Before starting up, read the warning instruc-
tions and the labels attached to the charger and
the battery!
100-240
V~50/60Hz
12.6 V
1 A
28.19Wh/2.6 Ah
3 INR 19/66
Use and handling of battery-powered tool
a) Batteries should only be charged with the
chargers recommended by the manufac-
turer. A charger suitable for a certain type
of battery poses a fi re hazard if used with
other batteries.
b) Use only the designated batteries in the
power tools. The use of other batteries can
cause injuries and pose a fi re hazard.
c) Keep unused batteries away from paper
clips, coins, keys, nails, screws and other
small metal objects which could bridge the
contacts. A short-circuit between the batte-
ry contacts can cause burns or fi re.
d) If used incorrectly, the battery can leak fl u-
ids. Avoid contact. In the event of incidental
contact, rinse with water. If the fl uid gets
into your eyes, seek medical assistance.
Leaking battery fl uids can cause skin irri-
tations or burns.
e) Do not use a damaged or modifi ed battery.
Damaged or modifi ed batteries can behave
unpredictably and cause fi res, explosions or
injuries.
f) Never expose a battery to fi re or excessive
temperatures. Fire or temperatures above
130°C can cause an explosion.
g) Observe all charging instructions and never
charge the battery or battery-powered tool
outside the temperature range specifi ed by
the operating instructions. Incorrect char-
ging or charging outside the approved tem-
perature range can destroy the battery and
increase the risk of fi re.
Service
a) Have your power tool repaired only by
qualifi ed specialists and use only origi-
nal spare parts. This ensures that the pow-
er tool remains safe to operate.
b) Never service damaged batteries. All
maintenance work on batteries should only
be carried out by the manufacturer or au-
thorised customer service centres.
- 13 -