Samsung NX58H9950W Serie Manual Del Usuario página 9

INSTALLATION SAFETY
DA WARNING To reduce the risk of fire, electric shock, personal injurles, and/or death, obey the
following precautions.
+ Have your range installed and properly grounded by a!
qualified installer, in accordance with the installation |
instructions. Any adjustment and service should be |
erformed only by qualified gas range installers or
service technicians.
+ Do not attempt to service, modify, or replace your
ange or any part of your range unless it is specifically
ecommended in this manual. All other service should \ J
be referred to a qualified technician.
OLLVW A1J4Y INVI LO
+ — Always use new flexible connectors when installing a gas appliance. Do not use old flexible
connectors.
+ Make sure the anti-tip device is properly installed on the range. See the installation instructions
for more information.
+ Due to the size and weight of the range, have two or more people move the range.
+ Remove all tape and packaging materials.
+ Remove all accessories from the cooktop, oven, and/or lower drawer. Grates and griddles are
heavy. Use caution when handling them.
+ Make sure no parts came loose during shipping. Do not install in an area exposed to dripping
water or outside weather conditions.
+ Make sure your range is correctly installed and adjusted by a qualified service technician or
installer for the type of gas (natural or LP) you will use. For your range to utilize LP gas, the installer
must replace the 5 surface burner orifices and 2 oven orifices with the provided LP orifice set, and
averse the GPR adapter. These adjustments must be made by a qualified service technician in
accordance with the manufacturer's instructions and all codes and requirements of the authority
having jurisdiction. The qualified agency performing this work assumes the gas conversion
esponsibility.
+ — Installation of this range must conform with local codes or, in the absence of local codes, with
he National Fuel Gas Code, ANSI 2223.1/NFPA.54, latest edition. In Canada, installation mus
conform with the current Natural Gas Installation Code, CAN/CGA-B149.1, or the current Propane
nstallation Code, CAN/CGA-B149.2, and with local codes where applicable. This range has been
design-certified by ETL according to ANSI 221.1, latest edition, and Canadian Gas Association
according to CAN/CGA-1.1, latest edition.
English - 9