Astoria Core600 AL Manual De Uso Y Mantenimiento página 86

Core600
9.5.6 Cleaning the shower screen and shower screen
containment ring
Clean the shower screen and shower screen contain-
ment ring on a weekly basis, following the steps indicated
below:
Loosen the screw using a
screwdriver (1);
Remove the shower screen
(2) and the shower screen
containment ring (3);
Carefully wash the two com-
ponents with hot water;
Reposition the shower
screen and shower screen
containment ring in their original position and lock
everything in place with the screw.
9.5.7 Cleaning the steam wand and autosteamer
Clean the steam spout once and autosteamer a week
as follows:
Immerse the spout in a jug with water and a specific
detergent according to manufacturer's instructions;
heat the solution with the steam of the spout;
let the spout cool off keeping it
immersed in the solution for at
least 5 minutes to allow the de-
tergent to rise inside the spout by
cooling effect;
repeat the operation 2 or 3 times
until milk is delivered.
86 300
of
10.
SPARE PARTS
Machine components and/or parts must be replaced
only by the Manufacturer's Qualified Technicians.
3
The User must not replace the components and/or parts of the
machine.
2
11.
DECOMMISSIONING
1
The machine must be decommissioned by the Manu-
facturer's Qualified Technician, because the equipment
must be disconnected from the electricity and water
mains, and all the internal circuits must be emptied of
the water.
The commissioning of the machine after this period
must be performed only by the Manufacturer's Qualified
Technician.
The User must not perform decommissioning after long time and/
or commissioning of the machine.
12.
DISMANTLING
The dismantling of the machine must be performed
by the Manufacturer's. Qualified Technician.
USER manual