Astoria Core600 AL Manual De Uso Y Mantenimiento página 48

Core600
1.
INTRODUCTION
Please read this manual in its entirety before using
the device, in order to optimise machine performance
and operate it safely.
The espresso coffee maker that you have pur-
chased has been designed and manufactured with
innovative methods and technologies which ensure
long lasting quality and reliability.
This Manual will guide you in discovering the
advantages of purchasing our product. You will find
information on how to get the best out of your ap-
pliance, how to keep it running efficiently and what
you should do should any problems occur.
Keep this Manual in a safe place. If you lose it, you
can ask the Manufacturer for another copy.
Before using the machine, read the instructions
c o n t a i n e d i n t h i s p u b l i c at i o n a n d fo l l ow t h e
instructions carefully. Keep this manual and all
attached publications in an accessible and secure place.
This document assumes that the machines have been installed
in a location where the current work safety and hygiene
standards are observed.
The instructions, drawings and documentation
contained in this Manual are technical and confiden-
tial. They are the sole property of the Manufacturer,
and may not be fully or partially reproduced in any
way.
The Manufacturer reserves the right to make any
improvements and/or modifications to the product.
We guarantee that this Manual reflects the technical
state of the appliance at the time it was marketed.
We take this opportunity to invite customers to
make any proposals in regards to improving the
product or its Manual.
Guidelines for reading the Manual
1.1
This Manual is divided into separate chapters. The chapter order is
linked to the temporal logic of the life of the machine.
Terms, abbreviations and pictograms are used to facilitate the im-
mediate understanding of the text.
This Manual consists of a cover, an index and a series of chapters.
Each chapter is sequentially numbered. The page number is shown in
the footer.
The first page displays the machine identification data and the last
page displays the date and revision of the Instruction Manual.
ABBREVIATIONS
Sect. = Section
Chap. = Chapter
Para. = Paragraph
P. = Page
Fig. = Figure
Tab. = Table
48 300
of
UNITS OF MEASUREMENT
The units of measurement are those provided by the International
System (SI).
PICTOGRAMS
Descriptions preceded by these symbols contain very important informa-
tion/ requirements, particularly in regards to safety. Failure to comply with
these may result in:
Danger to the operator's safety;
Injury, including serious injury of the machine users (in some cases
even death);
Loss of the guarantee;
The Manufacturer waiving liability.
DANGER symbol used when there is a risk of permanent serious
injury that would require hospitalisation, or in extreme cases,
even cause death.
CAUTION symbol used when there is a risk of minor injury that
could require medical attention.
WARNING symbol used when there is a risk of minor injury that
could be treated with first aid or the like.
NOTE symbol used to provide important information about the
topic.
Storing the Manual
1.2
The Instruction Manual must be stored in a safe place and must accom-
pany the machine in all the ownership transfers.
The manual should be stored, handled with care with clean hands and
not placed on dirty surfaces. Do not remove, tear or arbitrarily modify any
of its parts.
The manual must be stored in an environment protected from moisture
and heat, in close vicinity to the machine it refers to.
On the user's request, the manufacturer can provide additional copies of
the machine's Instruction Manual.
Method for updating the Instruction
1.3
Manual
The Manufacturer reserves the right to modify and make improvements
to the machine without notifying the user or updating the Manual that the
user has already received.
Moreover, when substantial changes have been made to the already
installed machine involving the modification of one or more chapters of the
Instruction Manual, it will be down to the manufacturer to send the users the
chapters affected by the changes or a revision of the entire Manual.
It is the users' responsibility to replace the old document with the new
revision.
The Manufacturer is responsible for the Italian content; any translations
cannot be fully verified; therefore, in the event of inconsistency, users can
refer to the Italian version or if necessary, contact the Manufacturer who will
make the appropriate changes.
USER manual