Idiomas disponibles
Idiomas disponibles
1 609 92A 7RX • 15.11.22 • T
AMPShare partners. This is the only way in
which you can protect the battery against dan-
gerous overload.
Protect the battery against heat,
e.g. against continuous intense sun-
light, fire, dirt, water and moisture.
There is a risk of explosion and short-
circuiting.
Product Description and
Specifications
Read all the safety and general in-
structions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or
serious injury.
Please observe the illustrations at the beginning
of this operating manual.
Do not use this power tool until you have
thoroughly read and fully understood this
operating manual. Pay additional attention to
the applicable national health and safety reg-
ulations.
Intended Use
English
The power tool is intended for making separating
cuts in plastic, metal and rubber while resting
firmly against the material being sawn. It is suit-
able for straight cuts with a mitre/bevel angle of
up to 45°. The saw blade recommendations are
to be observed.
Product Features
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Lock-off function for On/Off switch
(2) On/off switch
(3) Handle (insulated gripping surface)
(4) Locking clip for cover
(5) Roller guide
(6) Bandsaw blade
(7) Saw blade guide
(8) Direction of rotation arrow on housing
(9) Lever for bandsaw blade pre-tension
(10) Worklight
(11) Rechargeable battery
(12) Auxiliary handle (insulated gripping sur-
face)
(13) Cover for bandsaw blade
(14) Rechargeable battery release button
English
English
a)
(15) Roller for bandsaw blade
a) Accessories shown or described are not included
with the product as standard. You can find the
complete selection of accessories in our accessor-
ies range.
Technical Data
English
Bandsaw
Article number
Rated voltage
A)
No-load speed
Saw blade dimensions
Max. cutting depth
Weight according to
EPTA-Proced-
ure 01:2014
Recommended ambi-
ent temperature during
charging
Permitted ambient
temperature during
C)
operation
and during
storage
Recommended re-
chargeable batteries
Recommended char-
gers
A) Measured at 20–25 °C with rechargeable battery
ProCORE18V 8.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according
to EN 60745‑2‑20.
Typically, the A-weighted sound pressure level
of the power tool is 79 dB(A). Uncertainty
K = 3 dB. The noise level when working can ex-
ceed the volume stated. Wear hearing protec-
tion!
Vibration total values a
(triax vector sum) and
h
uncertainty K determined according
to EN 60745‑2‑20:
Sawing metal: a
= 5.3 m/s
h
The vibration level and noise emission value
given in these instructions have been measured
in accordance with a standardised measuring
procedure and may be used to compare power
tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission
value represent the main applications of the
power tool. However, if the power tool is used
for other applications, with different application
tools or is poorly maintained, the vibration level
en
15
ABAS18-63AS
7 135 ...
V=
18
m/
162
min
mm
733 × 12.7 ×
0.35
mm
63.5
B)
kg
3.7−4.7
°C
0 to +35
°C
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
English
2
2
, K = 1.5 m/s
