Idiomas disponibles
Idiomas disponibles
Operating instructions
Fault description
The device does not
heat up.
The appliance heats up
unevenly
The display of the active
operating mode shows
nothing or the device
cannot be operated.
The optional gantry lamp
module does not work
1
8.3
Troubleshooting
Cause
The setting button was
pressed for too long
Connection between control
and heating elements inter-
rupted
The sensor for temperature
detection is defective
The sensor for temperature
detection is defective
A single heating element is
damaged
The setting button was
pressed for too long
Power supply is interrupted
Display defective
Connection between control
and gantry lamp modules
interrupted
Control defective
There is a fault in the gantry
lamp module
1
only for installation with additional fixed gantry lamp module
8.4
Repairs and spare parts
Spare parts and accessories are available from our customer service.
Replace defective components with genuine spare parts. Only then
can safe and reliable operation be guaranteed. When ordering spare
parts or requesting customer service, always state the order number
and the information on the rating plate. This information helps avoid
follow-up queries and speeds up the process.
Remedy
Press and hold the setting
button for 5 seconds to
switch the associated dis-
play and function back on.
The connection must be
checked by a specialist and
restored if necessary.
The sensor must be
checked by a specialist and
replaced if necessary.
The sensor must be
checked by a specialist and
replaced if necessary.
The heating elements must
be checked by a service
technician and replaced if
necessary.
Press and hold the setting
button for 5 seconds to
turn the display and func-
tion back on.
The power supply must be
checked by a specialist and
restored if necessary.
The display must be
checked by a specialist and
replaced if necessary.
The connection must be
checked by a specialist and
restored if necessary.
The control unit must be
checked by a specialist and
replaced if necessary.
Observe the information in
the operating instructions
for the gantry lamp module.
Hot plate
Personnel
Operating staff
Electrician
Electrician
Maintenance engi-
neer
Operating staff
Electrician
Electrician
Electrician
Electrician
Operating staff
22 / 23
