Idiomas disponibles
Idiomas disponibles
Operating instructions
3.2
Improper use
All uses other than the intended one are improper. Improper use may
result in damage to property or injury.
In particular, make sure that the following inappropriate uses are
avoided:
■
Heating of materials and non-food items other than as specified
(e.g. flammable, corrosive or explosive materials)
■
Structural changes or changes in performance parameters
■
Using the hot plate in a defective condition and/or without protec-
tive coverings or safety devices
■
Operation with safety devices that are not in perfect condition, or
are bypassed or out of service
■
Use of spare parts that are not approved by Hupfer
3.3
Safety instructions
3.3.1 General information
The transport cart may only be used in a technically sound condition,
while taking risks and safety into consideration, for its intended pur-
pose and in accordance with the operating instructions.
All operating elements and controls must be in a technically sound
condition and functioning reliably.
Before each use, the unit must be checked for any visibly apparent
damage and defects. If damage occurs, immediately notify those
responsible and take the unit out of use.
Changes or conversions are only permitted after consultation and
written consent from the manufacturer.
3.3.2 Transport
For transport, the hot plate is packed and fastened on a suitable pallet
so that the surface is protected from damage caused by scratches or
stress cracks. The hot plate can be stored on the pallet until installa-
tion.
3.3.3 Maintenance
Troubleshooting may only be carried out by maintenance technicians.
Work on electrical equipment may only be carried out by electricians.
The work must be carried out in compliance with the rules of electrical
engineering.
Hot plate
11 / 23
