Idiomas disponibles
Idiomas disponibles
Operating instructions
Displaying the required temperature
Press the SET button
�� The required temperature is shown in the display.
Setting the required temperature
1.
Press and hold the SET button.
�� The required temperature is shown in the display.
2.
Select the required temperature needed using the corresponding
Up and Down buttons.
3.
Release the setting button.
�� The required temperature is now changed.
Switching on the gantry lamp modules
If the hot plate is connected to the gantry lamp modules, the latter can
be switched on using the hot plate controls.
Press the "Switch mode"
lamp module switches on.
�� Display 2 "Gantry lamp modules" lights up.
You can switch on the gantry lamp modules individually or together
with the hot plate. You can see from the display whether the gantry
lamp modules and/or the hot plate is switched on.
Switching off the gantry lamp modules
If the hot plate is connected to the gantry lamp modules, the latter can
be switched on using the hot plate controls.
Press the "Switch mode"
lamp module switches off.
�� Display 2 "Gantry lamp module" goes out.
You can switch on the gantry lamp modules individually or together
with the hot plate. You can see from the display whether the gantry
lamp modules and/or the hot plate is switched on.
6.3
Finishing operation
1.
Switch off the hot plate using the on/off button on the display.
2.
Let the hot plate cool down sufficiently.
�� The hot plate is ready for cleaning.
.
button repeatedly until the gantry
button repeatedly until the gantry
Hot plate
16 / 23
