Idiomas disponibles
Idiomas disponibles
9.5 Adjusting the bracket position
Fix the hob on the work surface by screw 2 brackets on the bottom of hob (see picture).
Adjust the bracket position to suit for different table top thickness.
9.6 Cautions
The hob must be installed by qualified personnel or technicians. We have professionals
1.
at your service. Please never conduct the operation by yourself.
The hob will not be installed directly above a dishwasher, fridge, freezer, washing
2.
machine or clothes dryer, as the humidity may damage the hob electronics
The hotplate shall be installed such that better heat radiation can be ensured to
3.
enhance its reliability.
The wall and induced heating zone above the table surface shall withstand heat.
4.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
5.
A steam cleaner is not to be used.
6.
9.7 Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard, or a
single-pole circuit breaker. The method of connection is shown as the diagram.
This hob must be connected to the mains power supply only by a suitably qualified person.
H07RN-F5G1,5*
19
