Idiomas disponibles
Idiomas disponibles
Touch the slider to the level you want to set.
If you don't choose a heat setting within 1 minute, the
•
hob will automatically switch off. You will need to start
again at step 1.
You can modify the heat setting at any time during
•
cooking.
If the display flashes
This means that:
you have not placed a pan on the correct cooking zone or,
•
the pan you're using is not suitable for induction cooking or,
•
the pan is too small or not properly centered on the cooking zone.
•
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
3.3.2
Finish cooking
Touching the IndicatorA.B.C to choose the cooking zone that
you wish to switch off.
Touch the slider to "0".
NOTE: make sure the display shows "0".
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear
when the surface has cooled down to a safe temperature. It can
also be used as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
3.3.3
Using the Boost function
Touching the IndicatorA.B.C to choose the cooking zone that
you want
Select the zone with Boost, then touching the BOOST key
(7), the zone indicator shows "P" and the power reach Max.
alternately with the heat setting
Activate the boost function
9
