Zodiac NOMAD RIB ALU 2.7 Manual Del Propietário página 32

ELECTRICAL CIRCUIT FOR THE ELECTRIC MOTOR
Ref.
1 Location 1 Original equipment battery L630mm x W300mm x H300mm
Dock power plug
2
Battery cut-off
3
Charger
4
Location 2 Original equipment battery L505mm x W300mm x H290mm
5
Waterline at full load
6
Cable attachment on tube
7
Control handle
8
Gauge
9
Ignition key
10
On/Off switch
11
Circuit breaker
12
Busbar, galvanic isolator, etc.
13
VII-3 Recommendations
WARNING!!!
FOLLOW THE MANUFACTURER'S INSTRUCTIONS.
NEVER WORK ON AN ELECTRICAL INSTALLATION WHILE THE CIRCUIT
IS POWERED UP.
NEVER CHANGE THE BOAT'S ELECTRICAL INSTALLATION NOR THE
CORRESPONDING DIAGRAMS. MODIFICATIONS AND SERVICING MUST
BE PERFORMED BY A QUALIFIED MARINE ELECTRICIAN. INSPECT THE
INSTALLATION AT LEAST ONCE EVERY TWO YEARS. NEVER LEAVE THE
BOAT UNATTENDED WHEN THE ELECTRIC POWER CIRCUIT IS
POWERED UP.
WE STRONGLY RECOMMEND USING A MOORING AWNING WHEN TIED UP TO
AVOID DAMAGE TO THE ELECTRIC MOTOR ELECTRICAL CIRCUIT COMPONENTS
IN CASE OF HEAVY RAIN OR OTHER EVENTS.
DESCRIPTION
Page 32 of 40
614764