Idiomas disponibles
Idiomas disponibles
ELECTRICAL REQUIREMENTS
For a grounded, cord-connected washer:
This washer must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electrical
'"
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
Plug into a grounded 3 prong outlet.
codes and ordinances.
Electrical Shock Hazard
Do not remove ground prong.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Do not use an extension cord.
in doubt as to whether the appliance is properly grounded.
Failure to follow these instructions can result in death,
Do not modify the plug provided with the appliance — if it will
fire, or electrical shock.
not fit the outlet, have a proper outlet installed by a qualified
electrician.
@
A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical
supply is required. A time-delay fuse or circuit breaker is
For a permanently connected washer:
This washer must be connected to a grounded metal,
recommended.
-
.
:
It is recommended that a separate circuit breaker serving only
permanent wiring system, or an equipment grounding
this appliance be provided.
conductor must be run with the circuit conductors and
This washer is equipped with a power supply cord having
connected to the equipment-grounding terminal or lead
a 3 prong grounding plug.
on the appliance.
@
To minimize possible shock hazard, the cord must be plugged
into a mating, 3 prong, grounding-type outlet, grounded in
accordance with local codes and ordinances. If a mating outlet
is not available, it is the personal responsibility and obligation
of the customer to have the properly grounded outlet installed
by a qualified electrician.
@
If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that
the ground path is adequate.
@
Do not ground to a gas pipe.
@
Check with a qualified electrician if you are not sure the
washer is properly grounded.
@
Do not have a fuse in the neutral or ground circuit.
