Specifications - Stihl MS 460 Manual De Instrucciones

English / USA

Specifications

Engine
EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category:
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
STIHL single cylinder two-stroke
engine
Displacement: 4.67 cu.in
(76,5 cm
Bore: 2.05 in
(52 mm)
Stroke: 1.42 in
(36 mm)
Idle speed: 2,500 rpm
(2.500 1/min)
66
Ignition System
Type:
Spark plug
(suppressed):
Electrode gap:
Fuel/Oil System
Carburetor:
Fuel tank capacity:
Fuel mix:
Air filter:
Chain lubrication:
Oil tank capacity:
Weight
without bar and
chain:
3
)
Depth limiter
(Special
Accessory):
Cutting Attachments
Rescue Operations
Electronic
magneto ignition
For rescue operations, use only chain
Bosch WSR 6 F,
specifically authorized by STIHL for
NGK BPMR 7 A
such use, i.e. Rapid Duro Rescue
(36 RDR).
0.02 in (0.5 mm)
STIHL recommends the following bar for
use with the above specified chain in
rescue operations:
All position
Rollomatic "S" with sprocket nose
diaphragm
20 in (50 cm)
carburetor with
integral fuel pump Normal Woodcutting
1.69 US pt (0,8 l)
Recommended cutting attachments
See "Fuel"
for compliance with § 5.11 of ANSI
Filter insert
Standard B 175.1-2000 for normal
(wire mesh)
woodcutting
Fully automatic oil
(see page 17 of this Manual):
pump
0.68 US pt (0.325 l)
STIHL reduced kickback bar
(with green label) for 3/8" pitch:
Rollomatic with sprocket nose
16, 18 or 20 in (40, 45 or 50 cm)
15.4 lb (7.0 kg)
STIHL low kickback chain
(with green label) for 3/8" pitch:
3/8" (9.32 mm) Rapid-Micro 2
2.56 lb (1.16 kg)
(33 RM 2, 36 RM 2)
3/8" (9.32 mm) Rapid-Super 3
(33 RSC 3, 36 RSC 3
Chain sprocket:
7-tooth for 3/8" pitch spur sprocket
1)
Rescue Saw