English / USA
Fit the spacer washers (4), cover* (5) and
spiked bumper (5) on the screws and
secure with the locknuts (6).
*
See "Guide to Using this Manual"
30
Mounting the Depth Limiter
:
Mount the guide bar and the saw
chain - see saw's instruction
manual.
:
Slip the depth limiter guide (1) over
the special guide bar
:
and insert the screws (2).
:
Push the sliding sleeve (3) over the
guide.
:
Fit the star knob (4) and washer (5).
:
Tighten the screws (2).
:
Pull the sliding sleeve (3) forward as
far as stop.
:
Tighten down the star knob (4)
firmly.
Rescue Saw