Refrigerator Installation; Unpacking Your Refrigerator - Kenmore 795.7943 Serie Manual De Uso Y Cuidado

WARNING
Excessive Weight Hazard:
Use two or more people to move and install the
refrigerator. Failure to do so can result in back or
other injury.

UNPACKING YOUR REFRIGERATOR

Remove tape and any temporary labels from your
refrigerator before using. Do not remove any warning-
type labels, the model and serial number label, or
the Tech Sheet that is located under the front of the
refrigerator, behind the base grille.
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also be
easily removed by rubbing a small amount of liquid dish
soap over the adhesive with your
water and dry.
Do not use sharp instruments, rubbing alcohol,
or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
Refrigerator shelves are installed in the shipping position.
Please reinstall shelves according to your individual
storage needs.
NOTE: 5HPRYH SURWHFWLYH oOP RQ GRRUV EHIRUH SOXJJLQJ
in the unit (on some models).

REFRIGERATOR INSTALLATION

Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to protect
the
moving it. Do not wiggle or walk the refrigerator when
trying to move it, as
Keep
gasoline, away from the refrigerator. Failure to do so
can result in
Wipe with warm
9
WARNING
Excessive Weight Hazard:
Always pull the refrigerator straight out when
damage could occur.
WARNING
Explosion Hazard:
materials and vapors, such as
explosion, or death.