Leveling; Door Alignment - Kenmore 795.7943 Serie Manual De Uso Y Cuidado

REFRIGERATOR INSTALLATION
8. Install the refrigerator handle by ajusting the handle
the set screws with a 3/32" hex wrench.
9. Install the hinge hole plug and the two screws on
the top of the handle with a screwdriver.
Screws
Diagnostics
Screw
Wrench
Handle
Hinge Hole
Plug
Handle
Corners
18

LEVELING

door closing.
Your refrigerator has two front leveling screws - one on
adjust the refrigerator's tilt using the instructions below:
1. Plug the refrigerator power cord into a 3-prong
position.
2. Use an 11/16" (18 mm) wrench or an adjustable
wrench to adjust the leveling legs, turn the level-
ing legs to the left to raise that side of the refrig-
erator or to the right to lower it. It may take
several turns of the leveling leg to adjust the tilt
of the refrigerator.
NOTE:
they close easily. If not, tilt the refrigerator slightly

DOOR ALIGNMENT

If the space between your doors is uneven, follow the
instructions below to align the doors.
1. Gently pry the top hinge cover on the refrigerator door
with a
or open-end wrench.
2. Have a second person hold the refrigerator door in its
proper position while you tighten the bolts.
3. Replace the top hinge cover.
of the leveling legs.
13
/ ''
32