Idiomas disponibles
Idiomas disponibles
17. Insert the decorative screw into the outer hole on the
right side of the housing. Attach the cover on the right
REATTACHING THE DOORS
1. Place the freezer door down over the hinge pin on the
middle hinge pin bracket.
2. Place the upper hinge pin on top of the freezer door
and line up the upper hinge with holes on top of the
refrigerator. Use the three bolts to replace the hinge.
hinge.
4. Move the cover on the top left side of the refrigerator to
the right top to cover the holes. Cover is also
Cover (on top of
refrigerator)
5. Rotate the handles. The freezer handle will move to the
refrigerator door, and the refrigerator handle will move to
freezer door.
NOTE: Make sure that the handle screw holes are facing
Decorative
the right side of the door.
Screw
6. Install the freezer handle by adjusting the handle
7. Install the two screws under the handle with a screwdriver.
17
REFRIGERATOR INSTALLATION
REFRIGERATOR INSTALLATION
B
the mounting fasteners. Tighten the set
screws with a 3/32" hex wrench.
Handle
Screws
A
B
A
Screw
Wrench
Handle
