Idiomas disponibles
Idiomas disponibles
Installing theStatus Indicator
The produce
preserver
comes with a status indicator,
which
should
be activated
and installed
at the same time the pouches
are
installed.
•
When
both doors are closed,
the hinged
seal automatically
forms a seal between
the two doors.
A
1.
Place the indicator
face-down
on a firm, flat
surface.
2.
Apply
pressure to the bubble
on the back of the indicator
until
the bubble
pops, to activate
the indicator.
3.
Slide open the cap on the top of the produce
preserver
housing.
4.
Place the indicator
in the top of the housing, facing
outward.
5.
Slide the cap closed, and check that the indicator
is visible
through
the rectangular
hole in the cap.
NOTE: The cap will not easily close if the indicator's
bubble
has
not been popped.
Replacing the Produce Preserver
The disposable
pouches
should
be replaced
every 6 months, when
the status indicator
has completely
changed
from white to red.
To order
replacements,
contact
us.
1.
Remove the used pouches from the produce
preserver
housing.
2.
Remove the used status indicator.
3.
Install the replacement
pouches
and status indicator
using the
instructions
in the previous
sections.
Replacement
Parts:
To order
stainless steel cleaner
or replacement
filters, in the U.S.A.
call 1-844-553-6667,
and in Canada
call 1-800-469-4663.
Ask for
the appropriate
part number
listed below or contact
your
authorized
Kenmore
dealer.
Stainless Steel Cleaner and Polish:
Order
Part #D22
M40083
R
REFRIGERATOR USE
There are two refrigerator
compartment
doors.
The doors can be
opened
and closed
either
separately
or together.
There is a vertically-hinged
seal on the left refrigerator
door.
•
When
the left-hand
refrigerator
door is opened,
the hinged
seal automatically
folds inward
so that it is out of the way.
A.H/nged
seal
IMPORTANT:
•
Wait
24 hours for your refrigerator
to cool completely
before
adding
food.
If you add food
before
the refrigerator
has
cooled
completely,
your food
may spoil.
NOTE:
Adjusting
the refrigerator
and freezer
temperature
controls
to a colder
than recommended
setting will not cool the
compartments
any faster.
•
The recommended
setting
should
be correct
for normal
household
refrigerator
use. The controls
are set correctly
when
milk or juice is as cold as you like and when ice cream
is firm.
•
If the temperature
is too warm
or too cold in the refrigerator
or
freezer, first check the air vents to be sure they are not blocked
before
adjusting
the controls.
Control Panel
Your refrigerator
has an internal
control
panel, located
at the top of
the refrigerator
compartment.
l
Replace
Filter
Cooling
[_
"_l
off
Freezer
Temp
Air Filter
Fast Cool
Moisture
Control
Lock
Fridge Temp
Temperature
Control
For your convenience,
the temperature
control
is preset at the
factory.
When
you first install your refrigerator,
make sure the
control
is still set to the recommended
setting as shown.
14
