Reiner 880 Manual De Instrucciones página 92

REINER 880
3.4.2. Cleaning ribbon mask
Cleaning ribbon mask
CAUTION
Cutting injury from sharp edges of the ribbon mask.
Do not touch the ribbon mask directly with your hands or wear protective gloves.
f
Grasp hood
f
3
thumbs .
2
Remove hood.
f
Clean the metal ribbon mask at the bottom of the hood
f
For stronger contamination, moisten the cloth with water and mild detergent.
2
Push hood
f
3.4.3. Cleaning print plate
Changing the print plate
Grasp hood
f
3
thumbs .
Remove hood
f
Pull out print plate
f
Clean the print plate
f
ten the cloth with water and mild detergent.
Insert in print plate
f
Re-attach the hood
f
92
Fig. C

2
with both hands and slightly push down the triangular marks with both
onto the device.
Fig.

2
with both hands and slightly push down the triangular marks with both
2
and put it aside.
7
by the handle.
7
with a soft cloth on demand. For stronger contamination, mois-
7
by the handle to the stop.
2
.
+
B C
2
with a soft cloth on demand.