Reiner 880 Manual De Instrucciones página 71

REINER 880
2.2.2. Overhead ON/OFF
This function permits turning the needle print by 180°.
Push [MENU].
f
"Imprint" appears.
Push [SELECT].
f
"Change Imprint" appears.
Push [u].
f
"Overhead ON/OFF" appears
Push [SELECT].
f
"OFF" or "ON" flashes.
Use the buttons [t] or [u] "ON" (overhead) or "OFF".
f
Confirm the desired imprint with [OK].
f
"Overhead ON/OFF" appears
To save the setting and return to the main menu,
f
push [RETURN] twice.
The main menu appears.
2.2.3. Changing centering
According to the factory settings "00", the print line (needle print) is output centred below
the imprint of the print plate (see "Example Imprint", page 64). the print line can be moved
on a scale from -75 to the left and +75 to the right, but not beyond the limit of the print area.
Push [MENU].
f
"Imprint" appears.
Push [SELECT].
f
"Change Imprint" appears.
Push [u] twice.
f
"Change Centering" appears.
Push [SELECT].
f
The current set number flashes.
Use the buttons [t] or [u] to choose the desired value.
f
Confirm the desired imprint with [OK].
f
"Change Centering" appears.
To save the setting and return to the main menu,
f
push [RETURN] twice.
The main menu appears.
GB
71