Black and Decker CCS818 Manual De Instrucciones página 16

specific legal rights a nd youmay have other r ights w hich v ary from
state tostate orprovince toprovince. Should y ou have any
questions, contact themanager ofyour n earest Black & Decker
Service Center. This product isnot i ntended forcommercial use.
FREE W ARNING
LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-544-6986 for a free
replacement.
LATIN AMERICA: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, check country
specific warranty information contained in the packaging, call the local
company or see the website for warranty information.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
See 'Tools=Electric'
- Yellow Pages -
for Service & Sales
16
Problem
• Tool will not
start.
Troubleshooting Section
If your Chain Saw does not operate correctly check the following:
Possible Cause Possible Solution
• Battery not •
installed properly.
• Battery not
charged.
• Lock-out button not •
actuated.
• Unit wilt not • Battery not
charge, inserted into
charger.
• Bar / chain • Chain too tight.
overheated.
• Lubrication
needed.
• Chain is loose. • Chain tension set •
incorrectly.
• Poor cut • Chain tension set •
quality, incorrectly.
• Chain needs
replacement.
• Unit runs but • Chain installed •
does not cut. backwards.
Check battery installation.
• Check battery charging
requirements.
Push lock off
button/actuate trigger.
• Insert battery into charger
until green LED appears.
Charge up to 9 hours if
battery totally drained.
• Refer to "adjusting chain
tension" section.
• Refer to "chain oiling"
section.
Refer to "adjusting chain
tension" section.
Refer to "adjusting chain
tension" section.
Note: Excessive tension
leads to excessive wear
and reduction in life of bar
& chain. Lubricate before
each cut.
Refer to "replacing the
chain" section.
Refer to sections for
installing and removing
chain.
For assistance, visit our website www.blackanddecker.com for
the location of the service center nearest you or call the
BLACK & DECKER help line at 1=800=544=6986.